Bottles & Insulators

A vacuum flask is a vessel which keeps its contents hotter or cooler than their environment by interposing an evacuated region to provide thermal insulation between the contents and the environment. more...

Home
Animals
Arcade, Jukeboxes & Pinball
Autographs
Banks, Registers & Vending
Barware
Bottles & Insulators
Bottles
Insulators
Breweriana, Beer
Casino
Clocks
Furniture, Appliances & Fans
Housewares & Kitchenware
Knives, Swords & Blades
Lamps, Lighting
Linens, Fabric & Textiles
Metalware
Militaria
Pens & Writing Instruments
Pez, Keychains, Promo...

The vacuum referred to is used for thermal insulation; the contents are not in vacuum conditions.

The vacuum flask was invented by physicist and chemist Sir James Dewar in 1892 and is sometimes referred to as a Dewar flask after its inventor. The first vacuum flasks for commercial use were made in 1904 when a German company, Thermos GmbH, was formed. Thermos, their tradename for their flasks, remains a registered trademark in some countries but was declared a genericized trademark in the US in 1963 as it is colloquially synonymous with vacuum flasks in general; in fact it is far more common to speak of a domestic thermos than a vacuum flask.

Theory of operation

A practical vacuum flask is a bottle made of glass, metal, or plastic with hollow walls; the narrow region between the inner and outer wall is evacuated of air. It can also be considered to be two thin-walled bottles nested one inside the other, and sealed together at their necks.

Using vacuum as an insulator avoids heat transfer by conduction or convection. Radiative heat loss can be minimized by applying a reflective coating to surfaces: Dewar used silver.

The contents of the flask reach thermal equilibrium with the inner wall; the wall is thin, with low thermal capacity, so does not exchange much heat with the contents, affecting their temperature little. At the temperatures for which vacuum flasks are used (usually below the boiling point of water), and with the use of reflective coatings, there is little infrared (radiative) transfer.

The flask must, in practice, have an opening for contents to be added and removed. A vacuum cannot be maintained at the opening; therefore, a stopper made of insulating material must be used, originally cork, later plastics. Inevitably, most heat loss takes place through the stopper.

Purpose and uses

Vacuum flasks are used to maintain their contents often but not always liquid, at a temperature higher or lower than ambient temperature. Domestically and in the food industry, they are often used to keep food and drink either cold or hot. A typical domestic vacuum flask will keep liquid cool for about 24 hours, and warm for up to 8.

In laboratories and industry, vacuum flasks are often used to store liquids which become gaseous at well below ambient temperature, such as oxygen and nitrogen; in this case, the leakage of heat into the extremely cold interior of the bottle results in a slow "boiling-off" of the liquid so that a narrow unstoppered opening, or a stoppered opening protected by a pressure relief valve, is necessary to prevent pressure from building up and shattering the flask. The excellent insulation of the Dewar flask results in a very slow "boil" and thus the contents remain liquid for a long time without the need for expensive refrigeration equipment.

Read more at Wikipedia.org